Belt Driven Radial Drill (BR-25 To BR-40)

Fine Feed Drill

Model No

BR-25
BR-38
BR-40A

Get A Quote

Technical Specifications

BR - 25

Model		BR-25
Capacity		Dist. From Spindle To Base	810/130 (Max/Min)
Drilling Capacity	25mm	Dist. From Coloumm to Spindle	620/350
Column Diameter	127mm	Electricals
Spindle Nose	MT-3	Drilling Head Motor (1440rpm)	1
Spindle Travel	200mm	Lifting Of Arm Motor (1440rpm)	0.5 H.P
No. Of Spindle Speed	8	V-Belt Section	B-40 & B-23
Spindle Speed(RPM)	110-2880	Others
Diameter of Ram	72mm	Machine Measurement	1020x810x1830
Working Range		Size Of Box Table	275x200x200
Max. Drilling Radius	660	Approx Weight Kg	425

BR - 38

Model		BR-38
Capacity		Working Range
Drilling Capacity	38mm	Dist. From Spindle to base (Max/Min) 950/240
Column Diameter	170mm	Dist. From Colum to Spindle	740/360
Spindle Nose	MT-4	Max.Drilling Radius	830
Dist. From Spindle		Electricals
To Pillar Surface	740mm	Drilling Head Motor (1440RPM)	1.5
Spindle Travel	250mm	Lifting of arm Motor (1440 RPM)	0.5 H.P
No Of Spindle Speed	8	V-BELT Section	B-47& B-24
Spindle Speed (RPM)	100-2125	Others
Diameter Of Ram	78mm	Machine Measurement	1240x750x2000
Approx Weight kg	800	Size Of Box Table	375x290x290

BR - 40A

Model	BR-40A	Model	BR-40A
Drilling in M.S.	40	Max/Min. Dist. Spindle
Drilling in C.I.	45	Center to column	920/385
Tapping in M.S.	20	Max. Drilling Radius	990
Boring is M.S.	75	Machine Measu. (LXBXH)	1350x850x1825
Spindle Hole Taper	MT-4	Diameter of Column	170
Spindle Travel	250	Work Table	300x300x385
Spindle Speeds (RPMx Steps)	88-2600x 8	Drill-head Motor	1.5HP/1440RPM
Diameter of RAM	78	Elevating Motor	1 HP/1440RPM
Spindle Auto feed Ranges	0.05 & 0.09	Head Motor V-belt	B-47
Max/Min. Dist. Spindle nose to base	850/250	Lifting Motor V-belt	B-25/B-26

*Specifications are subject to changed without prior notice.

Features

Column, Arm, Work Head & Gears are made out of Closed Grain.
Parts Properly Balanced Prior to Assembling of Main Gear & Pulley.
Parts Finished on imported Grinding Machine.
All moving parts Finished to close Tolerance.
Spindle Ram is made out of Alloy Steel.
Main Spindle & Pinion are Made out of EN Forged Steel.

Headquarters

Bhavya Machine Tools LLP

A-601, 6th Floor, Shapath-4,
Opp. Karnavati Club,
S.G. Highway Road,
Satellite, Ahmedabad - 380051,
Gujarat, India.

International Branch

Bhavya Machine Tools Trading LLC

Warehouse No.1, Building 5,
FAB Properties Complex,
Dubai Investment Park First,
Plot No. 598653,
Dubai, UAE.

Showroom

Bhavya Machine Tools

Plot No. 3, Survey / Block No. 86, PO. Vasna Chancharwadi, Nr. Divya Bhaskar Press, Bavla - Changodar Highway, Ta.: Sanand, Dist.: Ahmedabad - 382213, Gujarat, India.